Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Yonkers Homeowners
A garage door that won’t open, won’t close, or hangs off its track is a problem you feel all day. It’s your largest moving part and, for most Yonkers homes, the door you actually use to come and go. When a torsion spring snaps or an opener dies, you’re locked out of your own routine. We handle that call with technicians who have up to 10 years of experience, and we aim to get to same-day repair whenever the schedule allows. We work on whatever brand you have, quote the price before any work starts, and stand behind it. Call (877) 492-2580 and we’ll get a technician out to you in Yonkers.
What Our Garage Door Repair Service Includes
Most people call us with one symptom and find out a second part is involved. A door that slams down usually has a spring problem, not just a bad opener. A door that squeals and wobbles has worn rollers and a track that drifted. Because we handle every part of the door and every major brand, we can diagnose the whole system in one visit and fix what’s actually wrong instead of guessing from the first thing we see.
Panel Replacement
A panel is the section of the door itself, and it takes the beating: a car bumper, a stray basketball, a winter where the door froze and then got forced. When a panel dents, cracks, or bows, the door can bind against the frame and the opener starts straining to lift it. We match panel style and color as closely as the manufacturer allows for your Clopay or Wayne Dalton door, and we check that the new section is aligned with the rest of the door so it seats and seals properly.

Spring Repair
Torsion and extension springs carry the entire weight of the door, and when one lets go you’ll hear a sharp bang and the door will feel impossibly heavy. It’s the highest-tension, highest-risk part of any garage door system, so this is not a job to take on yourself. We replace one spring, or a matched pair when the second is at the end of its life, and reset the door’s balance so the opener isn’t doing work the springs should be doing. Spring repair runs $180 – $340 for one spring, and a pair is usually replaced together at about twice that.

Cable Repair
Cables are what keep the door level as it travels up and down, and a frayed or snapped cable will send one side of the door out of line within seconds. You might see a cable hanging loose, hear a scraping sound, or notice the door rising crooked. We replace the cable and inspect the drum and the point where it attaches, since a cable usually fails because something around it wore out first. Cable repair typically runs $130 – $250.

Track Realignment
The tracks guide the door and hold it in place, and even a small bend from a hit or a bad opener cycle will make the door drag or stick. A door that skips, jerks, or rubs against the frame needs the tracks checked before the motor takes more strain. We straighten or re-set the track and confirm the door rolls smoothly through the full travel. Track realignment is usually $120 – $240.
Roller Replacement
Rollers are the small wheels that ride inside the track, and they wear flat, dry out, or seize over years of use. Worn rollers are why a door gets loud, shakes on the way down, or feels rough at the halfway point. We replace them and check the hinges and the track surface while we’re in there, so the fix lasts. Roller replacement runs about $110 – $220.
Sensor Calibration
The safety sensors at the bottom of the door tell the opener to reverse when something is in the way, and misaligned or dirty sensors will stop a door dead or make it go back up for no apparent reason. It often looks like a failed opener when the real problem is a sensor knocked slightly out of line. We realign and test them across the full closing travel so the door behaves the way it should.
If the door needs more than a repair, we also handle garage door installation so you’re not handed to another contractor mid-project.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We service LiftMaster and Chamberlain openers and know the motor and logic-board quirks that show up on each, including the smart-home units that lose their Wi-Fi pairing and read as a dead opener. We work on Genie and Craftsman systems, where the older chain drives often need adjustment rather than replacement, and we handle Clopay and Amarr doors, matching panel profiles and hardware as closely as the manufacturer allows. For Wayne Dalton and Raynor, we check the torsion system and the track hardware those doors use, since each brand wears in a slightly different place. Whatever is on your door, we’ve likely seen the failure before and we know where to look.
You don’t need a brand-specific dealer to get your door working again. Whether you have a Wayne Dalton door with a tired spring, a Craftsman opener that won’t reverse, or a Raynor setup nobody else wants to touch, we can help. We diagnose what’s on your door, explain the repair in plain terms, and do the work in one visit where the parts allow.
Signs You Need Garage Door Repair Right Now
- The door won’t close all the way, or reverses on its own. This is often a sensor or track issue, not a motor failure, and it’s a security problem if the door stays open. Get it looked at before the gap becomes the way in.
- You heard a loud bang from the garage. That sound is usually a torsion spring breaking. The door becomes dangerously heavy and the opener can strip trying to lift it, so stop using the door and call us.
- The door is crooked or off the track. A door that rises on one side is running on a failed cable or a bent track, and forcing it can damage the panels and the opener. Don’t run the motor until it’s checked.
- The opener grinds, hums, or runs but the door doesn’t move. That points to a stripped gear, a worn drive, or a door that’s simply too heavy for the motor to lift. It’s a repair, not a full replacement, most of the time.
- The door is noisy, shaky, or slow. These are the early signs of worn rollers and dry hardware, and they’re cheaper to fix now than after the opener burns out from the extra strain.
Our Garage Door Repair Process – Step by Step
- 1
We take your call and ask the right questions. We ask what the door is doing, which brand and opener you have, and whether the door is stuck open. That tells us what to bring and how urgent the visit is.
- 2
We diagnose the whole system, not just the symptom. A technician checks springs, cables, rollers, track alignment, sensors, and the opener’s balance and travel settings with the right tools. That’s how a door that “just needs a sensor reset” doesn’t get sold a new motor.
- 3
You get a written estimate before anything starts. We explain what’s worn, what’s dangerous, and what can wait. The price we quote is the price you approve, and nothing changes when we’re under the door.
- 4
We do the repair and test it through a full cycle. Springs, cables, track, rollers, and sensors get tested together, because a door only works if every part works in balance. We check the safety reverse while we’re at it.
- 5
We walk you through what we did. You’ll know what failed, what we replaced, and what to watch for. If a second issue is likely down the line, we’ll tell you now rather than after it strands you.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Yonkers?
Garage door repair in Yonkers typically runs $150 – $600, depending on what failed and how many parts are involved. A typical spring repair runs $180 – $340 for one spring, and a matched pair is usually replaced together at about twice that. Cable repair runs $130 – $250, track realignment $120 – $240, roller replacement $110 – $220, panel replacement $250 – $500, and opener repair $120 – $320. If the opener itself is past saving, opener installation runs $250 – $550.
What moves the price: the brand and age of your door, how many parts were affected by the original failure, and whether the door is a standard size or a custom one. A single car door with a snapped spring is a fast, clean job. A door that’s been forced repeatedly and now needs springs, cables, and a realignment is more. The way to avoid overpaying is to get a written estimate that names each part before work starts, which is what we do every time.
Our estimates are free, and the written estimate sets the final price. Call (877) 492-2580 for an exact quote.
Garage Door Repair Near Yonkers – Our Service Area
We work throughout Yonkers and the towns around it, including Ardsley, Piermont, Elmsford, Hillcrest, Valhalla, and Thornwood. If you’re nearby and your door is stuck open or off its track, tell us when you call so we can prioritize it. You can also read more about our garage door repair and garage door repair coverage in those towns, and our garage door spring repair page if the spring has broken.
Serving Yonkers, NY – Our Local Coverage Area
We serve Yonkers and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Yonkers
Garage door repair covers any part of the door or opener that has failed or is out of adjustment: springs, cables, rollers, tracks, panels, sensors, and the opener motor or logic board. It’s not one fix; it’s diagnosing which part failed and restoring the door to safe, balanced operation. We handle the whole system in one visit rather than sending you to a brand specialist or a separate opener company.
Most repairs take about an hour to two hours once the technician is on site. Spring and cable replacements are typically the longer jobs because the door has to be rebalanced and tested carefully. If your door needs a panel or part we don’t have with us, we’ll tell you at the estimate stage so you know the timeline before we start.
Most repairs land between $150 and $600, with spring repair at $180 – $340 for a single spring and cable repair at $130 – $250. The exact number depends on what failed and how many parts are involved. Our estimates are free, and the written estimate sets the final price, so there’s no surprise invoice. Call (877) 492-2580 for an exact quote.
Yes, we service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, and we work on whatever brand you already have. That includes the older chain-drive openers and the newer smart-home units that lose their pairing. You don’t need to find a brand-specific dealer for a repair.
Yes, we offer emergency garage door service for doors that are stuck open, won’t close, or pose a security or safety risk. If your door is stuck open, the priority is getting it secured, and we’ll tell you what to do while we get a technician to you. Call (877) 492-2580 and tell us it’s urgent.
Our repairs are backed by a warranty on the parts and labor we provide, and we’ll spell out the specific coverage on your written estimate. The terms depend on the part and the brand, and we’d rather tell you exactly what’s covered up front than leave it vague. Ask the technician during the estimate and it goes on the paperwork.
Clear the area under the door and leave a path to the opener, and make sure an adult is home to let the technician in. If the door is stuck open, don’t force it closed by hand; leave it and tell us when you call. It also helps to note the door brand and any sounds or behavior you’ve noticed, because those clues point us to the right part faster.
Schedule Your Garage Door Repair Service in Yonkers Today
If your door is stuck, loud, off track, or just not closing right, don’t wait for it to fail completely. Call Yonkers Garage Door Repair Pros at (877) 492-2580 for a free, no-obligation estimate. We’ll tell you what’s wrong, quote the price before we start, and fix it in one visit where we can. You’ll get the repair done right by technicians who know your brand.
Written by the team at Yonkers Garage Door Repair Pros.